Loading and unloading steps of bulk cement trucks from China manufacturer

Loading steps of bulk cement truck from China manufacturer:
1. Before loading, open one feed port and close the other feed port;
2. Close the discharge butterfly valve and the external air source interface;
3. Open the exhaust valve of the bulk cement truck from China manufacturer;
4. Select one of the bins for loading, and after loading one bin, close the feeding port of the bin;
5. Open the feeding port of another warehouse and load the material;
6. After the loading of the two warehouses is completed, close the exhaust valve and the feeding port;
7. Tighten the feed port.

bulk cement truck from China manufacturer
The unloading steps of bulk cement truck from China manufacturer:
1. Before unloading, check whether the unloading butterfly valve, the external air source interface, the exhaust valve and the two feed ports are closed and tightened. If they are not tightened, they must be tightened first to prevent air leakage;
2. Start the engine of the bulk cement truck from China manufacturer and shift the transmission to neutral, and at the same time depress the clutch pedal to completely separate the transmission from the engine;
3. Open the power take-off solenoid valve switch, and at the same time slowly release the clutch pedal to make the air compressor rotate;
4. Adjust the handle of the control mechanism of the bulk cement truck from China manufacturer, adjust the speed of the air compressor to about 900r/min, and stabilize it;
5. When the pressure reaches 0.18MPa, first open the auxiliary blowing pipe, then open the discharge disc valve of the front and rear bins to start discharging, and then the pointer of the air compressor will stabilize to a certain value;
6. When the air pressure drops to 0.04Mpa, the rear compartment has been unloaded, close the blower, open and close the butterfly valve of the rear compartment several times, and then close the butterfly valve of the rear compartment and the intake valve of the rear compartment, that is, only the front compartment is unloaded. , after which the pressure will rise and stabilize to a certain value;
7. When the pressure of the air pressure gauge reaches 0MPa, the discharge is completed, close the air compressor (close the power take-off switch), and close the discharge butterfly valve.

Loading and unloading steps of bulk cement trucks from China manufacturer
Loading and unloading steps of bulk cement trucks from China manufacturer