Scanll QR code
Copyright CHINA SINOTRUK INTERNATIONAL CO., LIMITED. All rights reserved 津ICP备09003385号-1
Cleaning method of sewage suction truck and sewage suction truck supplier
The sewage suction truck is a new type of sanitation vehicle that collects, transfers, cleans, and transports sludge, sewage, and avoids secondary pollution. The sewage suction truck can self-absorb and discharge. It has fast working speed, large capacity and convenient transportation. It is suitable for collecting and transporting feces, mud, Liquid substances such as crude oil. The sewage suction truck adopts the domestic technology-leading vacuum pump of the sewage suction truck, which has large suction power and long suction range. It is especially suitable for the suction, shipment and discharge of sludge in the sewer, especially for sucking sewage mud, silt, stones, and bricks. Large objects such as blocks.
The special part of the sewage suction truck is composed of power take-off, transmission shaft, vacuum sewage suction pump, pressure tank, hydraulic part, pipe network system, vacuum pressure gauge, sight window, hand washing device, etc., equipped with high-power vacuum sewage suction Pump and high-quality hydraulic system, the tank head is die-casted at one time, the tank can be opened behind, and the double top is self-unloading. The dirt in the tank can be dumped directly through the back cover, and it has the characteristics of high vacuum (more suction than fecal suction truck), large tonnage, high efficiency, and wider use.
Oil-water separator, water-gas separator, hydraulic self-unloading device, special vacuum suction pump, volume pressure gauge, suction pipe, self-flow valve, vacuum tank, connector (sight window), automatic anti-overflow valve, hydraulic kit .
The cleaning method.
1. First of all, pay attention to the frequent washing of the car, not too frequently, this will easily damage the paint of the sewage suction car.
2. Use clean water when washing the car, otherwise the fine sand in the sewage will wipe the float paint. If the temperature is relatively low in winter, it should be washed with warm water.
3. Use clean and special car wash towels. Generally, towels have strong friction and can easily damage the paint of the dirt suction car. Especially after washing the car in winter, wipe off the water on the body immediately to avoid residual icing. The paint is damaged.
4. Car washing should be carried out in a ventilated and cool place as much as possible. It is best to wash the car in a place where the sun can shine in winter.
5. When washing the car, pay attention to the waterproof work of some parts of the sewage suction truck, such as the horn, car lights, door lock holes, etc., so as to avoid the failure of the horn, the fog of the car lights or the freezing of the door lock hole in winter. .
6. Do not wash the car immediately after the sewage suction truck has been driven in winter. You should wait until the engine temperature of the sewage suction truck drops to avoid damage to the engine due to thermal expansion and contraction.
Pay attention to the quality of the fecal suction truck board, the vacuum tightness, and the poor material can easily cause the tank body to deform.
The choice of sewage suction truck, pressure bearing capacity and temperature difference perception. The domestic kit first launched the Veyron series of products.
The selection of the post flow valve is based on the local operating environment and temperature difference.
CHINA SINOTRUK INTERNATIONAL CO., LTD is sewage suction truck manufacturers,mainly engaged in water bowser truck，bomb cart semi-trailer and so on.If you want buy jetting truck and wholesale road sweeper,you can contact us.