Search

Mobile site
Scanll QR code

Copyright CHINA SINOTRUK INTERNATIONAL CO., LIMITED. All rights reserved     津ICP备09003385号-1

008613802120810

HOTLINE:

.

>
>
>
The working principle of china dump truck

The working principle of china dump truck

Classification:
Dump truck
Release time:
2021/08/19
Page view

China Dump truck refers to a vehicle that unloads goods by hydraulic or mechanical lifting. It is composed of a car chassis, a hydraulic lifting mechanism, a cargo compartment, and a power take-off device. The carriage of china Dump truck is divided into two types: backward tipping and side tipping. The movement of the piston rod is controlled by the control system. Backward tipping is more common. Pushing the piston rod causes the truck to tip over, and a few have two-way tipping.

china dump truck

The structure of the engine, chassis and cab of the china Dump truck is the same as that of a general truck. The high-pressure oil enters the lifting hydraulic cylinder through the distribution valve and the oil pipe.
The china Dump truck engine drives the hydraulic pump through a transmission and a power take-off device. The hydraulic tilting mechanism of the carriage is composed of an oil tank, a hydraulic pump, a distribution valve, a lifting hydraulic cylinder, a control valve and an oil pipe.
The china Dump truck engine drives the hydraulic pump through the transmission and the power take-off device. The high-pressure oil enters the lifting hydraulic cylinder through the distribution valve and the oil pipe, and pushes the piston rod to cause the carriage to tip over. Lateral tilting is more common, and the movement of the piston rod is controlled by the control system to stop the carriage at any required tilt position. The china Dump truck carriage uses its own gravity and hydraulic control to reset.