PRODUCTS CENTER
Product Description
Characteristic
◆ Optimized final drive structure allowing large gear modular design；advanced structure of reinforced input shaft and integral thru shaft
◆ 3-section cast axle housing, oversized square section allowing good support rigidity and prolonging the service life of final drive assembly；
◆ The wide brake enabling good brake stability and long service life of friction lining；
◆ Higher axle rigidity and strength，higher bearing capacity；high transmitted torque， higher reliability and low noise
Application scope
Suitable for severe road conditions and high impact operating environment，optimal for heavy engineering trucks.
AC16 Series Axle
|
Model |
AC16(Single axle） |
AC16（twin axle） |
|
Pattern |
Central reduction+hub reduction,cast axle housing |
|
|
Rated axle load（kg） |
16000 |
2×16000 |
|
Speed ratio |
4.77/5.45/6.5 |
|
|
Leaf spring block center distance（mm） |
1010 |
1020 |
|
Standard tread（mm） |
1850 |
1850 |
|
Input flange |
180 contract tooth |
180 contract tooth |
|
Differential locking device |
Inter-wheel |
Inter-axle，inter-wheel |
|
Brake form and size（mm） |
Drum type 420×220 |
|
|
Weight：excluding lubricating oil（kg） |
825 |
Intermediate axle：927/rear axle:825 |
|
Wheel installation mode |
Rim centralized positioning,wheel bolt 10-M22×1.5，distribution circle 335 |
|
|
Minimum rim size（inch） |
20 |
20 |
|
Lubricating oil |
GL5 85W-90 |
|
Copyright CHINA SINOTRUK INTERNATIONAL CO., LIMITED. All rights reserved