Many people are familiar with the Water bowser truck. The water bowser truck can play a certain role in summer or winter. The normal job of the water bowser truck is to sprinkle water. Before sprinkling water, it needs to absorb water. Water bowser The truck manufacturer reminds that some problems need to be paid attention to when carrying out the water absorption operation.

Water bowser truck needs to pay attention to the problem of water absorption operation

1. If the water source is shallow, you need to dig deeper at the suction point in advance to ensure that it does not contain debris and air. The clean water pump requires no impurities in the water, and the turbid water pump requires no stones or a large amount of sand in the water.

2. A certain amount of diversion water must be added to the centrifugal water pump each time before absorbing water. The self-priming water pump needs to add water when it is used for the first time, and there is no need to add water after it.

3. The inlet pipe system must maintain a certain degree of vacuum when sucking water, and the inlet pipe system must be sealed and reliable to avoid air leakage.

4. Regardless of whether the water bowser truck is before absorbing water or before sprinkling, the power take-off device must be shifted when it is parked.

5. Before winter comes, the water in the Water bowser truck pump and the water pipe should be emptied.

As a functional vehicle, the Water bowser truck needs to be used continuously for a long time. Therefore, the maintenance of the Water bowser truck is particularly important. The maintenance of the Water bowser truck is in place to ensure the vehicle’s performance. The service life has been extended, so be sure not to neglect to maintain it.